WHAT IS IPTV ? Internet Protocol Television (IPTV) uses Internet technology to send television programming to your TV. IPTV uses a broadband Internet connection for top international programming directly to your home without a satellite dish. Just connect your receiver to your IPTV Internet from the house and on your TV, then sit back and enjoy.

WHAT IS THE DIFFERENCE BETWEEN TRADITIONAL AND SATELLITE IPTV PROGRAMMING ? Traditional satellite dish requires the customer to install a dish on their whereabouts. IPTV offers a unique solution for customers who are unable to satellite programming (due to no sight to the satellite or apartment with its limitations). IPTV provides higher quality and cheaper than traditional satellite service.

WHAT DO I NEED TO USE IPTV ? To install and use the IPTV, you need the following: High-speed Internet connection (recommended or higher) at least 70 Mbps. A functioning Smart TV, computer, Tablet or Smart Phone.

HOW DO I CHECK MY INTERNET SPEED & QUALITY ? Please use speed test server below to test your internet connection, Do this few times through the day. This will give you a good idea of overall internet speed available to you. A stable 70 Mbps is the minimum requirement.http://www.speedtest.net/

CAN I USE THE IPTV AS I LIVE IN AN APARTMENT ? Yes, IPTV is perfect for people who live in an apartment! IPTV works well everywhere with high-speed internet, including apartment buildings or high-rise buildings, or as a satellite TV dish cannot be installed at your home. Often traveling? Take the IPTV, and watch your favorite programs on the go or at the temporary destination.

CAN I BUY THE IPTV IF I DO NOT COME INTO CONSIDERATION FOR SATELLITE SERVICE ? Yes, you can buy and use IPTV if you do not qualify for a satellite TV service. Since IPTV delivers international programming to your TV via the Internet, no satellite dish is required. Moreover, To qualify, you need a high-speed internet connection of at least 70 Mbps or higher.

WHY I CAN’T ACCESS MY ACCOUNT ? First, please check your network connection, reboot your router and device, and then try again. Secondly, if your network connection is no problem, please check whether your account is used on other devices as you can’t view from more than 1 device at the same time..

I AM NOT IN OR FROM USA/CAN OR THE UK. CAN I STILL SUBSCRIBE ? Yes. Our service is available worldwide to everyone.

CAN I USE MY SUBSCRIPTION ON MULTIPLE DEVICES ? Please pay attention that 1 subscription can be used on multiple devices but you can watch only on 1 device at the same time.

HOW TO CHECK MY DEVICE ? Check if you entered your activation details correctly. * Check your network connection, reboot your router and device, and then try again. * If you have PC/Laptop, etc. connected to same internet network check if you are not overloading your network with downloading or watching movies, etc… on these devices. * Your Internet needs to be minimum 70 Mbit Download and 1 Mbit upload speed. * Reboot your devices and wait for 30 sec before turning them back on (STBs, Android Boxes, Routers, Cable modems) * Make sure you are connecting using a LAN (Ethernet) cable to devices and not via Wifi. * If your network connection is no problem, please check whether your account is used on other devices. * Check if the device/app/program got the latest software and firmware updates. * Check the download speed on the actual device that is streaming our service, you may have 50mbs on your computer, but the device could be considerably slower, indicating a problem on your internal network. * Check for any high processor demanding applications running in the background that can be stopped, this is very important for low-end devices. * Try uninstalling and reinstalling your app/program, your activation will not be lost.

MY CHANNELS ARE NOT WORKING ? We strive to provide you with a high level of service at very discounted rates. So please keep this in mind first and foremost. If a channel is down, we will do our best to restore that back to service. Please use the guidelines belowbeforereportingachannel: * Stop and give it a couple of minutes. We reboot and swap channels when needed. The channel may be coming back. * Is this happening on all channels? If it is, you need to check on your end. * Reboot your devices and wait for 30 secs before turning them back on (STBs, Android Boxes, Routers, Cable modems) * Make sure you are connecting using a LAN (Ethernet) cable to devices and not via Wifi.

CHANNEL ISSUES ? If while you are watching a channel the service appears to have paused, simply select and open another channel, then return to the original channel to see if it is now playing, this can be due to break in transmission for a second, the software will halt under these conditions.

BUFFERING ON CHANNELS ? Sometimes you may experience buffering due to low internet speed or high internet traffic. Cause: The most common cause of buffering is the result of slow internet connection. This may be because of low internet speed or other users hogging the bandwidth in your house. Do you have lots of users in your home? Disconnect them all and try again The second reason is that you are using Wi-Fi, which is not suited for watching TV as you need direct (LAN) connection to internet network in order to enjoy smooth watching without interruptions. Resolution: Directly connect to your router using a LAN (ethernet) cable or to a powerline adaptor. If not possible, try moving the box closer to the router. Change your WI-FI channel. To avoid interference with nearby devices. If you experience buffering press “pause” for 10-15 seconds and resume, most of the time that will eliminate the need to buffer.

ALL CHANNELS ARE BLANK ? If you are using a set-top box such as MAG or AVOV and have just set up your device with our service, you will need to perform a hard reset of your device. Simply power off your device, unplug your power cable and re-plug it in. For Kodi, you will need to clear your cache. If unsuccessful, attempt a re-install of Kodiitself.

MY M3U LINK IS NOT WORKING ? If the link is not working, always check the link on PC using the VLC software. If it works it means that there is something wrong on your end. When typing in your M3U link make sure you are not entering any space and you are not using your M3U link on other devices. Contact us if the link does not work on your PC after troubleshooting.

WHY MY ACCOUNT IS NOT WORKING ON MY MAG BOX OR STB EMULATOR ? Did you give us the correct MAC address? * Is your Internet speed at the recommended minimum 70 Mbps for HD channels — or higher? * Is your device wired in (Ethernet) or is it connected wirelessly (WiFi or mobile data)? Ethernet will always be faster and more stable; use Ethernet, if you can. * Are your device’s specs powerful enough to effortlessly handle live HD streaming? * If you’re using an STB emulator did you follow the steps of the guide to Setup Android STB Emulator? * If you’re using an STB emulator have you tried wiping your app’s cache then restarting your device? * If you’re using a MAG box have you tried restarting your device? * If you’re using an Android device/MAG box have you tried logging out then factory resetting your device? * Have you double-checked the server portals we sent you in the activation e-mail?

Preparing Fire TV to Sideload TiviMate Firstly, we need to get the Downloader app on the Firestick Then, we’ll make the necessary changes in our Fire TV settings. The quick steps are as follows: 1. Select Magnifying Glass on FireStick home. Then, open the Search box. Start typing Downloader. Select Downloader appeared among the suggestions below the keyboard. Next, select the Downloader app, which you can recognize by its orange background. On the next screen, select the Get or Downloadbutton. 2. On FireStick home, select the Settings Gear on the far right. Then scroll down and select My Fire TV. Choose Developer Options. Note: If you do not see Developer Options, go to Settings > My Fire TV> About.Now, select Fire TV Stick and click it 7 times to enable Developer Options. You will see one of the following two options depending on your FireStick device version: You will see one of the following two options depending on your FireStick device version: Option 1 - Install Unknown Apps: Click it and proceed to the next step to enable Downloader. Option 2 - Apps from Unknown Sources: Click this option and then click Turn On on the following prompt. Skip the next step. Now, you can comfortably sideload any app installation file (APK) on the FireStick without any issues. Use Downloader to Install TiviMate on FireStick 1. Launch Downloader and select the Enter a URL box on the home screen. 2. A virtual keyboard will open. Type firesticktricks.com/tivi and hit Go at the bottom. Note: Flawlesstvs.com does not host this APK. This URL redirects you to an external source. 3. Downloader will install the latest TiviMate APK onto your FireStick. It’s about 12MB. 4. Click Install when prompted. 5. Click on DONE when the TiviMate installation is complete. 6. After installation, click Delete to remove the TiviMate APK from your device. 7. Click Delete once again to complete the removal. That’s it. You’ve successfully installed the TiviMate APK on your FireStick. By connecting an IPTV service to the app, you can enjoy hundreds of live channels. Your FireStick / Fire TV is now all ready to stream your favorite content. Getting Started with TiviMate IPTV Player TiviMate IPTV Player would be your first choice to stream channels via your subscribed IPTV service. So, I advise placing the app on the FireStick home screen for easy access. To get started, you need an active subscription to an IPTV service. TiviMate doesn’t offer any content to users on its own. Note: Setting up an IPTV service in TiviMate may not work when connected to a VPN. Disconnect the VPN, add the IPTV service, and reconnect the VPN. Select Add playlist. TiviMate will ask you to add a playlist using an M3U link, Xtream code, or Stalker Portal. I’m selecting the M3U playlist because my IPTV provider uses this technology. Note: When you subscribe to an IPTV service, you will receive an email with relevant login information and an M3U link. If you don’t get an M3U link, try contacting customer support and requesting an M3U link. TiviMate will ask for your M3U link. Enter your M3U link and press Next. Note: Most M3U links contain a username and password. They look something like this: http://013tv.com:8080/get.php?username=test-65927c&password=e657&type=m3u_plus&output=ts Click Next. TiviMate will load the IPTV service and offer a peek at the number of channels and movies available in the IPTV package. Also, you can select Playlist name to change the name. Once done, click Next to continue. Note: You can select TV or VOD playlists per the nature of your IPTV service. If your IPTV provider provides an EPG URL, enter it in this window. Select Enter URL, enter the URL, and click Next. Once done, select Done to save the playlist. Lastly, note down the remote control and click OK to finish the setup.

1. OPEN STB EMU APP 2. SELECT THE MENU BUTTON OR HOLD DOWN THE OK BUTTON ON YOUR REMOTE, THEN SELECT SETTINGS 3. UNDER COMMON SETTINGS, SCROLL DOWN AND SELECT NETWORK SETTINGS 4. UNCHECK THE BOX FOR ENABLED NETWORK CACHE, THEN CLICK BACK 5. SCROLL DOWN AND SELECT PROFILES, THEN NEW PROFILE ON THE RIGHT SIDE 6. SELECT PROFILE NAME 7. CHANGE PROFILE NAME TO YOUR SERVER NUMBER OR COLOR, THEN SELECT OK 8. SELECT PROFILE SETTINGS 9. SELECT PORTAL URL 10. DELETE THE DEFAULT URL AND ENTER THE PORTAL URL WE SENT YOU, SELECT OK, THEN CLICK BACK 11. SELECT STB CONFIGURATION 12. SELECT MAC ADDRESS 13. CHANGE THE MAC ADDRESS TO THE ONE WE EMAILED TO YOU, SELECT OK, THEN CLICK BACK TO THE FIRST STB EMU APP SCREEN 14. USING THE MENU BUTTON OR HOLDING DOWN THE OK BUTTON ON YOUR REMOTE, OPEN THE RIGHT SIDE MENU, SCROLL DON AND SELECT PROFILE, THEN SELECT THE SERVER 15. STB EMU APP WILL NOW START CONNECTING TO THE SERVER

1. Click the All Apps icon on your Fire TV home screen. 2. Select the IPTV Smarters Pro app tile to launch the app. 3. Click Load Your Playlist/File. 4. Enter your chosen playlist name in the Playlist Name section. you can choose any name , but I chose to write Yeah IPTV in my case. 5. Select the M3U URL under Playlist Type. 6. Enter the M3U URL link provided by Yeah IPTV after buying a subscription. Click Add User. Alternatively, you can log in with the provided server address, username, and password. I found this method simpler because the server address link isn’t as long as the M3U URL link. Below are the steps: 1. After launching IPTV Smarters Pro, select Login With Xtream Codes API. 2. Enter your preferred name for the IPTV service. Also, fill in the username, password, and server address as provided in the email. After filling in these details, click Add User. You have successfully set up Yeah IPTV on IPTV Smarters Pro. Click Download to load the content from the Live, Movies, and Series folders. Navigating content on IPTV Smarters is easy. Begin exploring the channels by selecting the Live tab. This tab shows the channels provided by Yeah IPTV. You can browse the various categories by country or genre, such as Cinema, Kids, Entertainment, and Sports. To start watching a channel, highlight it on the channel list and press the OK button on the Fire TV remote. Then, click on the playback tab at the top right to view the content on a full screen. Flawless Tv IPTV VOD content is divided into Movies and Series. Click on the Movies tab to explore the available films. There are various ways to browse through the library and find your favorite movies. You can use the search function at the top for starters. Alternatively, you can scroll through the various categories on the menu on the left. These categories include Recently Added, Eng 4K UHD, Eng Classics, Eng Action & Adventure, and Eng Animation. When you select a movie title, a new page will reveal more details, including the description, release date, genre, cast, and duration. Press Play to start watching the movie. Navigating the Series folder is straightforward too. You can find interesting titles through the search function at the top. You can also explore the various categories on the menu. These include Eng Series, Recently added, and popular streaming services. Upon selecting a show title, you get more details about it on a fresh page. These include the storyline, cast, genre, release date, and number of episodes. Click Play S1E1 or explore the episodes using the Season-X menu. Other notable features to help explore Yeah IPTV include the Multiscreen, Catch Up, and Live with EPG. Catch Up lets you watch programs that aired in your absence. You can catch up with shows up to 48 hours after they aired. Yeah, IPTV gives good value for your subscription, from the channel lineup to the VOD library.

How to Install IPTV on Roku With a Simple Trick This tutorial provides step-by-step instructions for installing IPTV on Roku. We must “sideload” IPTV on the Roku device. The instructions below require a computer to download the IPTV app file and add it to your Roku streaming device. NB: Using another IPTV Players like Tivimate, you can watch IPTV on Roku by casting to your Roku device. IPTV Smarters is one of the best IPTV Players, compatible with hundreds of IPTV services that use a server URL. Anyways, let’s get into how to install IPTV on Roku. I divided the instructions into four parts to make them easier to follow: Part 1: Enabling developer options on Roku. Part 2: Adding the IPTV Smarters channel. Part 3: Downloading the IPTV Smarters package on your computer. Part 4: Installing IPTV Smarters on Roku. Don’t worry. The process is easier than it sounds. Let’s begin. Enable Developer Options on Roku 1. Launch your Roku and press the following buttons in the same order on your remote: Home Button x3, Up Arrow x2, Right Arrow x1, Left Arrow x1, Right Arrow x1, Left Arrow x1, Right Arrow x1, Left Arrow x1, Right Arrow x1. The developer options menu will appear on your Roku TV screen if done correctly. 2. Write down the IP address listed on the screen. 3. Select Enable installer and restart (mine says Disable because I’ve already done this). 4. Scroll through the Developer Tools License Agreement and select I Agree. Use the keyboard that appears to create a web server password. You will need this password for a later step. 5. Select Set password and reboot. Part 2: Add IPTV Smarters Channel 1. Head to your computer and navigate to my.roku.com using any browser. Type in your username and password for your Roku account, and click Submit. 2. Once logged in, select Add channel with a code, under Manage account. 3. Type iptvsmarters into the box. Make sure you’ve typed it exactly as shown. 4. Select Add Channel to add it to your Roku. 5. Click OK on the warning message that appears. 6. Select Yes, add channel on the following popup. Part 3: Download IPTV Smarters Package on Your Computer Now, it’s time to download the IPTV Smarters file onto your computer. 1. Head to this link on your computer, and the download should start automatically: https://www.whmcssmarters.com/clients/dl.php?type=d&id=108 Note: flawlesstvs.com doesn’t host or distribute this APK. The link leads to the site where it’s hosted. 2. Save the IPTV Smarters package somewhere accessible on your computer (you’ll need to browse to this location in a moment). I’m going to save it on my Desktop. Part 4: Install IPTV Smarters on Roku 1. Open any browser on your computer. Enter the IP address from your Roku you wrote down earlier. 2. A sign-in box will appear. Type rokudev as the Username. For the Password, type in the webserver password you created earlier. Finally, click Sign in. 3. Click Upload on the next page. 4. Browse to the location where you downloaded the IPTV Smarters package (mine was my Desktop). Select the downloaded folder and click Open. 5. Click Install once the file is uploaded. 6. If you see this screen, you’ve done it correctly! 7. Return to your Roku device, and IPTV Smarters will be on the television. Simply log in with your IPTV Smarters information, and you’re in! Now that you have successfully installed IPTV Smarters on your Roku device, please visit our website's FAQ section and refer to the article titled "HOW DO I SET UP IPTV ON IPTV-SMARTERS PRO FOR FIRE TV." Or You can rather access it by clicking the following link: https://www.flawlesstvs.com//s/f/how-do-i-set-45521 ,This resource will guide you through the process of configuring your IPTV on IPTV Smarters or Smarters Pro.